AMX Stereo Amplifier AVB DA RGBHV 0103 User Manual

Installation Guide  
Solecis AVB-DA-RGBHV-0103  
AVB-DA-RGBHV-0103 Specifications (Cont.)  
Overview  
The Solecis AVB-DA-RGBHV-0103 1x3 RGBHV BNC Distribution Amplifier  
(FG1340-3403-01) is a high quality wide bandwidth distribution amplifier. With a  
video bandwidth in excess of 350MHz (-3dB) the AVB-DA-RGBHV-0103 is  
suitable for all RGBHV, RGBS, RGsB and YUV type signals and can be used as  
a composite video distribution amplifier.  
Certifications:  
• CE  
• UL  
• FCC class B, part 15  
• RoHS/WEEE compliant  
Safety Instructions  
Please read these instructions before using your AMX Solecis device. Failure to  
comply with these instructions could result in fire, electrical shock, personal injury,  
death, or damage to the equipment.  
The terminated inputs and 75 ohm driven outputs make the  
AVB-DA-RGBHV-0103 ideal for connection to long cable runs.  
The AVB-DA-RGBHV-0103 is housed in a metal enclosure and is powered by  
the supplied external 9VDC power adaptor.  
Liquid Spills  
(front)  
Do not set drinks on top of the unit or immerse the unit in liquid.  
Do Not Disassemble  
This device contains no user serviceable parts. All servicing must be performed by a  
qualified service technician.  
For Safety Reasons  
Do not place the unit on an unstable surface.  
Do not use near water or sources of heat.  
Use only recommended attachments.  
Use the type of power supply as specified.  
Unplug the power to the unit and refer servicing to qualified personnel under the  
following conditions:  
If liquid has been spilled or the unit has been exposed to rain or water.  
If it does not operate normally when the operating instructions are followed or if it  
exhibits a distinct change in performance indicating a need for service.  
If the unit has been dropped or the cabinet damaged.  
(rear)  
Connections  
PC Source  
FIG. 1 Solecis AVB-DA-RGBHV-0103  
Product Specifications  
Connect the PC source to the Input socket on the rear panel of the unit and  
connect monitors, projectors etc to the Output sockets.  
AVB-DA-RGBHV-0103 Specifications  
The PC video input is 75 ohm terminated.  
RGB Input  
The PC video outputs are fully 75 ohm driven for connection to long cable  
runs.  
Number:  
1
Connector:  
Level:  
BNC  
Note: It is imperative that the input source is fully compatible with the display  
device.  
Analog  
1V p-p  
75 ohm  
Max Level:  
Power  
Connect the supplied power pack to the power socket on the unit or  
alternatively use an unregulated 9VDC supply.  
Impedance:  
Sync Input  
Type:  
Connect the 9V supply to a MAINS source. The power LED on the front of  
the unit will light and the input signal will be present on all 3 outputs.  
Analog or TTL  
Impedance:  
RGB Video Bandwidth:  
RGB Return Loss:  
75 ohm  
350MHz -3dB  
-45dB@10MHz, -28dB@100MHz  
Adjacent Channel X-talk: -70db@10MHz, -50dB@100MHz  
RGB Output  
Number:  
Connectors:  
Level:  
3
BNC  
Analog  
Unity  
75 ohm  
Gain:  
Impedance:  
Sync Output  
Level:  
TTL  
Impedance:  
Power  
75 ohm  
Connector:  
2.1mm DC power jack for use with included external  
power supply.  
Input Voltage:  
9VDC  
Power Consumption:  
Dimensions (HWD):  
Weight:  
TBD  
43mm x 224mm x 115mm  
1.5kg  
Included Accessories:  
9V Power supply  
 

ABC Office Paper Shredder FD 415 User Manual
Acer Flat Panel Television AT2621 AT2622 User Manual
Actiontec electronic Modem 56K V90 User Manual
ADTRAN Network Card DDM+ HTU C M User Manual
Aiwa Car Stereo System CDC XI15 User Manual
Amana Microwave Oven RCS10DA User Manual
American Audio MP3 Player Portable Audio Recorder User Manual
American Standard Door 3232STE2 User Manual
Audiovox Car Speaker UB124W User Manual
Axis Communications Security Camera 231D+ User Manual