Quick Start Guide
UDM-0102 Endeleo Multi-Format Distribution Mini-Hub
Overview
UDM-0102 Specifications (Cont.)
The UDM-0102 Endeleo Multi-format Distribution Mini-Hub (FG-UDM-0102) is
designed for small installations with long video/audio cable runs (FIG. 1).
Power Socket:
Operating Environment: • 35°F - 95°F (5°C - 35°C)
• Max. relative humidity - 85% (non-condensing)
2.1mm barrel-style DC power socket (female)
ETHERNET port (RJ-45)
Serial port (RJ-12)
Status LED
Dimensions (HWD):
Weight:
1.61" x 8.63" x 3.66" (40.89 mm x 219.08 mm x 93.04 mm)
1.60 lb. (730 g)
Certifications:
• CE
• FCC part 15 Class A
Source
Select
Included Accessories:
Power Supply, 24VDC, 750 mA with cable (FG-UDM-PS)
Power LED
button
Other AMX Equipment: • HD15 to S-Video Cable (FG-UDM-SVID01)
• HD15 to 3x RCA Breakout Cable (FG-HD15RCA3F)
• RS232 DB9/RJ12 Connection Cable (FG-RS01)
• UDM-RX02 Multi-Format Receiver (FG-UDM-RX02)
• UDM-RC10 Multi-Format IR Engineering Remote
Control (FG-UDM-RC10)
Active input (A/B) LED
Preset buttons (1/2)
RJ-45 port for connection
to an UDM-RX01/02 Receiver
SPDIF female
RCA Audio
Left and Right (B)
RCA Audio
Digital Audio
connector (A)
Left and Right (A)
IRTX ports
• IR01 IR Emitter Module (FG-IR01)
• IR03 External IR Receiver Module (FG-IR03)
Audio & Video Formats/Resolutions/Distance
Audio & Video Formats/Resolutions/Distance
SPDIF female
Digital Audio
connector (B)
Class
Format
Name
NTSC
PAL
Distance (m)
700
Distance (ft.)
2300
2300
2300
2300
650
IRRX port
HD15 female connector (A)
Composite
720x480
HD15 female connector (B)
720x756
700
Power connector
Component
720x480
480p
576p
720p
1080i
1080p
VGA
700
FIG. 1 UDM-0102 Hub - Front and Rear panel components
720x756
700
Compatibility
1280x720
1920x1080
1920x1080
640x480
200
The UDM-0102 is compatible for use with the UDM-RX02 (FG-UDM-RX02) receiver.
150
500
120
400
Product Specifications
VGA
200
650
UDM-0102 Specifications
800x600
SVGA
XGA
200
650
Power Requirements:
24VDC @ .75A
1024x768
1280x1024
1600x1200
200
650
Front Panel Components
SXGA
UXGA
150
500
120
400
Ethernet (RJ-45) port: Provides 10 BaseT network connectivity
Serial (RJ-12) port
(labelled “10101”):
Enables an administrator to control the various functions
A/V Source Input Connectors
There are 2 sets of input connectors to the rear panel of the UDM-0102, labelled A and
to the UDM-0102 from a command line prompt and
terminal connection. Requires a DB9-to-RJ12 adapter
cable (FG-RS01) to connect to a PC.
Connecting a VGA Video Input
LEDs:
The front LEDs are grouped by control type and are
labeled according to their corresponding port (connector)
numbers on the rear of the unit.
1.
Connect one end of a VGA cable to the source device’s VGA output port.
2.
Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM. For example, connect to the Video In connection on Input
A of the Hub.
• Power - device is receiving power
• A - Source A is currently selected
• B - Source B is currently selected
3.
Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)
connector.
• Status - changes from red to green when it receives a
valid UDP command, and returns to red after 30
seconds if it has not received anything.
Note: Ensure Input A is configured as a “VGA Input” and named appropriately within
the “Inputs” section of the Configuration software. Also ensure the correct Audio Type
(Analog L/R or S/PDIF) is selected for the relevant input.
SELECT (A/B)
Pushbutton:
Pushbutton switches between Source A / Source B.
Connecting a Composite Video Input
1.
Connect the UDM-HD15RCA3F Breakout Cable (FG-HD15RCA3F, not
included) to the source device’s Composite output ports:
PRESETS (1/2)
Pushbuttons:
Two pushbuttons execute user-defined presets.
•A1 = red RCA
•A2 = green RCA
•A3 = blue RCA
UDM (RJ-45) port:
Provides audio/video transport as well as control via Cat5,
Cat5e or Cat6 to a UDM-RX02 Receiver.
Rear Panel Connectors:
2.
3.
Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM.
Source Inputs (A, B): Two sets of input connectors for A/V source devices
(labelled A and B):
Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)
connector.
• VIDEO IN: HD-15 input connector (female) - supports
VGA, Component, S-Video and Composite formats.
• Analog Audio: Left (white) and Right (red) stereo RCA
input connectors (female).
Connecting a Component Video Input
1.
Connect the UDM-HD15RCA3F Breakout Cable (FG-HD15RCA3F, not
included) to the video source device’s Component video output connectors
(Red, Green and Blue).
• Digital Audio: SPDIF (female) input connector.
2.
3.
Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM.
IRTX Ports:
IRRX Port:
Two 3.5mm stereo IR Transmitter output ports allow up to
two IR-controlled devices (such as a DVD or VCR player)
to be controlled via optional wired IR emitters.
Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)
connector.
3.5mm stereo input port, allows connecting an IR receiver
to allow learning IR commands.
